This Fabric Waste Chopping Machine is guillotine type, through blade controlled by inverter shearing up and down, can cut the materials into a certain length, cutting size is uniform and adjustable. For reciprocating shear mechanism, this cutter uses the low-speed and large torque motor. Transmission uses cycloidal reducer with frequency conversion speed regularly. The installation of each component is easy to operate, easy maintenance, high strength, durability, reliability, safety in one. Will significantly improve the production efficiency.This Adjustable cotton waste yarn cutting machine can quickly cut up all kinds of scrap cloth, cotton waste yarn, used clothing,cotton, chemical fiber, linen, leather, paper, trademark brand, non-woven fabrics and other materials (the other can be equipped with strong magnetic separation, in case of hard ferrous metal injury blades), the chopped material in uniform size, chopped material length is adjustable.
Applications
• Textile, chemical fiber, non-woven fabric: Waste yarn, waste fabric, chemical fiber filament, non-woven fabric scraps cutting and recycling
• Waste plastic recycling: Plastic filament, plastic film, plastic rope cutting and granulation
• Waste paper, cardboard recycling: Waste paper, paper edges shredded for reuse
• Leather, sponge, carpet scraps: Waste material cutting and processing
Glass fiber, carbon fiber and other industrial fibers: Short-cutting, fixed-length cutting
Key Configurations
Main motor
• Ordinary motor: Runs at a constant speed, inexpensive, suitable for scenarios where there are no special requirements for speed.
• Variable frequency: Can be adjusted continuously for speed, automatically adjusting the speed according to the hardness of the material. It operates at a slower speed for steel cutting and a faster speed for aluminum cutting, consuming less electricity and achieving smoother cuts.
Transmission system
• Chain drive: Low noise, low cost, and has overload protection function (slippage).
Cutting tools
• Rotating cutting tool (rotary cutter): Installed on a rotating knife roller, rotating at high speed.
• Fixed cutting tool (bottom knife): Fixed on the frame, remaining stationary.
• Usage: When the rotating cutting tool rapidly passes over the fixed cutting tool, a force similar to that of scissors is formed, tearing or cutting the fabric located between the two.
Operation interface
• Touchscreen PLC control: The current standard feature. It can store multiple sets of cutting data, which can be directly accessed and real-time fault alarms can be displayed.
Numerical control system
• Single-chip microcomputer controller: The function is relatively simple, and it can only perform simple length setting and counting.
Delivery speed control
• Deceleration strips: They prevent and slow down the rolling speed of the materials. This helps to avoid the materials colliding with the feeding clamps or positioning baffles at high speeds, which could damage the material ends and also prevent vibrations caused by the impact from affecting the machine's accuracy.
• Deceleration rollers:
Precisely control the feeding speed and posture
Straighten and support the materials
Protect the surface of the materials
Technical Specifications
(Custom configurations available upon request.)
Model | MT800R | MT1200R | MT1600R | MT2000R |
Output (kgs/h) | 500-800 | 500-1000 | 800-1500 | 1000-2000 |
Blade qty | 4+1 | 6+2 | 4+1 | 4+1 |
Blade size (mm) | Cr12Mov | Cr12Mov | Cr12Mov | Cr12Mov |
Power | 380v/50Hz | 380v/50Hz | 380v/50Hz | 380v/50Hz |
Main motor (kw) | 5.5+1.5 | 7.5, 2.2 | 15+2.2+1.5 | 22+2.2+1.5 |
Feeding and output conveyor (mm) | 1400x350 | 2000x530 | 2800x680 | 600 |
Cutting thickness (mm) | 1-50 | 1-80 | 1-50 | 1-80 |
Cutting size (mm) | 5-75 | 5-80 | 5-80 | 5-300 |
Machine size (mm) | 3200x1000x1200 | 4400x1250x1200 | 6200x1600x1500 | 6000x1760x1500 |
Weight (kgs) | 800 | 1200 | 2200 | 2000 |
If you have any questions or needs about the product, please fill in the following form and we will contact you as soon as possible.